Ricoh MIB-II - Manual (Page 222)

Operating Instructions Administrator Reference
222
Exit pserver (In print server mode) Exits the print server because the
necessary print server settings have not been made.
Frametype =<frame type name> The <frame type name> is configured to be used on Net-
Ware.
httpd start. An httpd has started.
IEEE 802.11b Card Firmware REV.IEEE 802.11b Card
Firmware REV. This is the wireless LAN card's firmware version.
IEEE 802.11b current channel <Channel> The current channel is displayed.
The value chosen by the user is displayed in ad hoc mode.
The channel used in the access point is displayed in infra-
structure mode.
(Example: Current channel is 11.)
IEEE 802.11b current channel 11
IEEE 802.11b MAC Address = <MAC Address> The IEEE 802.11b I/F MAC address is displayed.
(Example: Current MAC address is
00:00:74:XX:XX:XX.)
IEEE 802.11b MAC Address =
00:00:74:XX:XX:XX
IEEE 802.11b SSID <ssid> (AP MAC Address < MAC
Address>) The SSID of the access point used in infrastructure mode
and the MAC address of the access point are displayed.
(Example: Current MAC address is xx:xx:xx:xx:xx:xx
and SSID value is "test-ssid".)
IEEE 802.11b SSID test-ssid (AP MAC Address
xx:xx:xx:xx:xx:xx)
Message Description and Solutions