Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 27
Operating Instructions
Administrator Reference
27
Standard TCP/IP Port
A Click
[
Create a new port:
]
.
B Select
[
Standard TCP/IP
]
in
[
Create a new Port
]
, and then click
[
Next
]
.
C Click
[
Next
]
in the "Add Standard TCP/IP Printer Port Wizard" window.
D Type the printer name or IP address in the "Printer Name or IP Address" box, and then
click
[
Next>
]
.
E Click
[
Finish
]
in the "Add Standard TCP/IP Printer Port Wizard" window.
LPR Port
A Click
[
Create a new port:
]
.
B Select
[
LPR Port
]
in
[
Create a new Port
]
, and then click
[
Next
]
.
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click
[
OK
]
.
GGGG
Confirm to select the name of the printer whose driver you want to install, and then click
[
Next >
]
.
HHHH
Change the name of the printer if you want, and then click
[
Next >
]
.
Configure the default printer as necessary. Check
[
Yes
]
to set the printer as the default printer.
IIII
Check
[
Share as:
]
, and then click
[
Next >
]
.
To change the printer name, change it in the
[
Share as:
]
box.
Note
❒
Check [
Shared
] to start installation of an alternative driver ([
Windows NT 4.0/2000
], [
Windows 95/98
])
has already been selected.
❒
You can add an alternative driver after installation. See