Changing port settings, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 47
Operating Instructions
Administrator Reference
47
LLLL
Set up the options.
Reference
For more information about option settings, see
.
Changing Port Settings
Follow the steps to change SmartNetMonitor for Client settings, such as the proxy server settings or
IPP URL.
AAAA
From the
[
Printers and Faxes
]
window, click the icon of the printer you want to use. On the
[
File
]
menu, click
[
Properties
]
.
BBBB
Click the
[
Ports
]
tab, and then click
[
Configure Port
]
.
The
[
Port Settings
]
dialog box appears.
•
For TCP/IP protocol, you can configure Timeout Settings.
Note
❒
If you cannot set items on the [
Recovery/Parallel Printing
] tab, follow the procedure below.
A
Click [
Cancel
] to close the [
Port Configuration:
] dialog box.
B
Start SmartNetMonitor for Client, and then right-click the SmartNetMonitor for Client icon
on the taskbar.
C
Click [
Extended Features Settings
], and then select the [
Set Recovery/Parallel Printing for each
port
] check box.
D
Click [
OK
] to close the [
Extended Features Settings
] dialog box.
•
For IPP, you can configure User Settings, Proxy Settings and Timeout Settings.
Note
❒
For more information about these settings, see SmartNetMonitor for Client Help.