Using autonet, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 232
Operating Instructions
Administrator Reference
232
Note
❒
Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS
server. See
❒
Supported DHCP server is Windows NT 4.0 Server Service Pack 4 or later, Windows 2000 Server
and NetWare 5.
❒
If you do not use the WINS server, reserve the printer's IP address in the DHCP server so that the
same IP address is assigned every time.
❒
DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via an ISDN line, it
will result in expensive line charges. This is because your computer connects to the ISDN line when-
ever a packet is transferred from the printer.
Using AutoNet
If the printer IP address is not assigned by a DHCP server automatically, a temporary IP address starting
with 169.254 which is not used on the network can be selected automatically by the printer.
Limitation
❒
You must change the setting to "on" to use AutoNet. See
Note
❒
The IP address assigned by the DHCP server is given priority to that selected by AutoNet.
❒
You can confirm the current IP address on the configuration page. For more information about the
configuration page, see
p.130 “Printing a Configuration Page”
.
❒
When AutoNet is running, the NetBIOS name is not registered on the WINS server.