Displaying the signal strength, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 144
Operating Instructions
Administrator Reference
144
CCCC
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to display "Maintenance" menu, and then press the {{{{Enter #}}}} key.
The following message appears on the panel display.
DDDD
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to display "Menu Protect", and then press the {{{{Enter #}}}} key.
EEEE
Press the
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} key to display "Off", and then press the {{{{Enter #}}}} key. Wait for two sec-
onds.
"Maintenance" appears on the panel display.
FFFF
Press the
{{{{On Line}}}} key.
"Ready" appears on the panel display.
Displaying the Signal Strength
If you need to check the IEEE 802.11b (Wireless LAN) signal, select "WL.LAN Signal" in the "Main-
tenance" menu.
AAAA
Press the
{{{{Menu}}}} key.
“Menu” appears on the panel display.
BBBB
Press the
{{{{T
T
T
T}}}} or {{{{U
U
U
U}}}} key to display the “Maintenance” menu.
Maintenance:
Color Regist.
Menu:
Maintenance