Using smartnetmonitor for admin, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 92
92
Operating Instructions
Administrator Reference
5. Using SmartNetMonitor for Admin
Using SmartNetMonitor for Admin, you can not only monitor the status of network printers, but also
allows you to change the configurations of the Network Interface Board using the TCP/IP protocol or
IPX/SPX protocol.
SmartNetMonitor for Admin is equipped with the following functions.
•
Device Information function
•
Checks the printer's network settings and detailed information of devices.
•
Checks the number of pages printed for each computer, using the user codes.
•
Checks the results of print jobs executed from the computer.
•
Enables you to change the printer's network settings.
•
Device Settings function
•
Limits the settings to be done from the control panel, and disables changes to be made to some
of the items.
•
Enables the selection of paper type loaded in the printer.
•
Energy Saver function
•
Switches to the Energy Saver mode, and wakes up from the Energy Saver mode.
•
System Status function
•
Checks the information on printing, paper exhaustion, and such, on the computer.
•
Groups function
•
Monitors multiple printers at the same time. When there are many printers, you can create groups
and classify the printers to facilitate management.