Ricoh MIB-II - Manual (Page 111)

Operating Instructions Administrator Reference
111
Web Browser
AAAA
Run the Web browser.
BBBB
Type the address "http:// (IP address of the printer you want to change the settings)".
The status of the selected printer is displayed on the Web browser.
CCCC
Click [ Configuration ] .
A dialog box that prompts you to type the user name and a password appears.
DDDD
Type the user name and the password, and then click [ OK ] .
Type only the password in this dialog box. The factory default password is "password".
EEEE
Change names and comments.
TCP/IP
A Click the [ General ] tab, and then type the name into the [ Printer Name ] box and comment
into the [ Comment ] box.
• In the [ Printer Name ] box, type the name of the printer within 13 characters. The factory de-
fault name consists of "RNP" and the last 3 bytes of the MAC address on the Network Inter-
face Board. For example, when the MAC address is 00:00:74:62:7D:D5, the factory default
name is "RNP627DD5". No name of 9 characters is permitted if the prefix is "RNP". Also,
when DHCP is selected as an IP address setting, the number of characters is limited to within
13 characters.
• In the [ Comment ] box, type any comment on printers within 31 characters.