Ricoh MIB-II - Manual (Page 214)

Operating Instructions Administrator Reference
214
Configuring the Network Interface Board
The Network Interface Board settings can be displayed by using the commands below.
• telnet : Use the show command. See p.190 “Network Interface Board configuration settings infor-
mation” .
Item name Meaning
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
NetBEUI
IP over 1394 *1 *4
SCSI print *4
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
Up means active, Down means inactive.
Internal version number.