Ricoh MIB-II - Manual (Page 233)

Operating Instructions Administrator Reference
233
Configuring a WINS Server
The printer can be configured to register its NetBIOS name with a WINS server when power is turned
on. This enables the NetBIOS name of the printer to be specified from SmartNetMonitor for Admin
even under a DHCP environment.
This section describes how to configure the WINS server.
Note
❒ The WINS Server is supported with Windows NT 4.0 Server Service Pack 4 or later, and Windows
2000 Servers WINS Manager.
❒ For more information about the WINS Server settings, see Windows Help.
❒ If there is no reply from the WINS Server, the NetBIOS name will be registered by broadcast.
❒ The NetBIOS name consists of up to 13 alphanumeric characters.
Using a Web browser
AAAA
Start the Web browser.
BBBB
Point your browser at the URL or IP address of the printer (e.g. http://XXX.XXX.XXX sub-
stituting the Xs with the IP address).
The status of the printer you chose appears on the Web browser.
CCCC
Click Network Config.
The dialog box for entering the password and user name is displayed.
DDDD
Enter your user name and password, and then click [ OK ] .
To use the factory default account, enter no user name and type "password" for the password.