Ricoh MIB-II - Manual (Page 182)

Operating Instructions Administrator Reference
182
- - - -
Viewing/Deleting spool jobs in a Web browser
Launch the Web browser and enter the machine's IP address in the address bar. This displays the top
page.
Example : http://192.168.0.10
(In this example, the IP address of the machine is 192.168.0.10)
Click “Admin Info”, and then “Spool Printing Job List (Printer)” to display the spool jobs. To delete,
check the box next to the name of the file you want to delete. Enter the password
*1 , and then click
[ Delete ] . For more information, see p.103 “Configuring the Network Interface Board Settings” .
*1 The default password is “password”.
- - - - Setting Spool Printing
Spool Printing can be set using telnet or a Web browser.
• Using a Web browser
Click ”Configuration”, and then “General”. Set “Spool Printing”to “Enable”.
• Using telnet
Enter “spoolsw spool on” to set Spool Printing.
Reference
For more information about how to set up the spool printing, see the Help file.