System log information, Snmp, Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 191
Advertising
Operating Instructions
Administrator Reference
191
Reference
For more information about the meaning of the data returned with this command, see
figuring the Network Interface Board”
System log information
Use the syslog command to display information stored in the printer's system log.
msh> syslog
Reference
For more information about the displayed information, see
p.219 “System Log Information”
.
SNMP
Use the snmp command to display and edit SNMP configuration settings such as the community name.
Note
❒
You can configure from ten SNMP access settings numbered 1–10.
❒
Default access settings 1 and 2 are as follows:
Number
1
2
Community name
public
admin
IP address
0.0.0.0
0.0.0.0
Access type
read-only
trap off
read-write
trap off
Advertising