Configuring the energy save mode, Operating instructions administrator reference – Ricoh MIB-II User Manual

Page 99

Advertising
background image

Operating Instructions

Administrator Reference

99

Configuring the Energy Save Mode

AAAA

Run SmartNetMonitor for Admin.

BBBB

Click the

[

Group

]

menu, point to

[

Search Device

]

, and then select

[

TCP/IP

]

or

[

IPX/SPX

]

.

A list of printer appears.

Note

Select the protocol of the printer you want to change its configuration.

CCCC

Select the device you want to make a setting for.

You do not need to select anything if you want to make a setting for all the devices in the group.

DDDD

Click

[

Group

]

and point to

[

Energy Save Mode

]

.

EEEE

To make a setting only for the device you have selected, click

[

Set Individually

]

.

FFFF

To make a setting for all the devices in the group, click

[

Set By Group

]

.

GGGG

Then select any energy saver mode from the menu that appears.

Advertising