Ricoh MIB-II - Manual (Page 34)

34
Operating Instructions Administrator Reference
2. Windows XP Print Server Configuration
To use a printer connected to the Ethernet interface, select "SmartNetMonitor", "Standard TCP/IP Port"
or "LPR Port" when installing the printer driver.
• SmartNetMonitor
See
p.34 “Configuring the Protocols” and p.37 “Installing Software” and p.38 “Installing the PCL
5c or RPCS Printer Driver” or p.43 “Installing the PostScript Printer Driver” .
• Standard TCP/IP Port, LPR Port
See
p.34 “Configuring the Protocols” and p.38 “Installing the PCL 5c or RPCS Printer Driver” or
p.43 “Installing the PostScript Printer Driver” .
Note
❒ If you want to use "LPR Port", "Print Services for UNIX" must be installed.
Configuring the Protocols
Configuring TCP/IP and IPP for Printing
Follow these instructions to configure the Network Interface Board and Windows XP to use the TCP/IP
protocol and IPP.