Ricoh MIB-II - Manual (Page 190)

Operating Instructions Administrator Reference
190
Printer status
The following commands can be used to get information about the current status of the printer.
msh> command
Note
❒ More information about any print job is displayed when the ID number is added after the prnlog com-
mand.
Reference
For more information about the meaning of the data returned with these commands, see p.212 “Un-
derstanding the Displayed Information” .
Network Interface Board configuration settings information
Use the show command to display the Network Interface Board configuration settings.
msh> show [-p]
Note
❒ Add "-p" to the show command to have information displayed on screen at one time.
Command Information that is displayed
status Status of printer.
Information about the print jobs.
info Information about the paper tray, output tray, and
printer language.
prnlog [ID] Lists the last 16 print jobs.