Ricoh MIB-II - Manual (Page 206)

Operating Instructions Administrator Reference
206
Getting Printer Information over the Network
Printer current status
You can check the printer's status using the telnet command.
❖ ❖ ❖ ❖ telnet
Use the status command.
Messages Description
Add Toner: Cyan The toner cartridge is empty.
Add Toner: Magenta The toner cartridge is empty.
Add Toner: Yellow The toner cartridge is empty.
Calibrating... The printer is calibrating or the photoconductor unit is being supplied.
Color Regist Error The color registration error has occurred.
Energy Save Mode The printer is in Energy Saver Mode.
Hardware Problem Black PCU The photoconductor unit is not set correctly.
Hardware Problem Bypass Tray An error has occurred in the Bypass Tray.
Hardware Problem Color PCU The photoconductor unit is not set correctly.
Hardware Problem DIMM An error has occurred in the DIMM.
Hardware Problem Ethernet An error has occurred in the Ethernet interface.
Hardware Problem HDD An error has occurred in the optional Printer Hard Disk.
Hardware Problem IEEE1394 An error has occurred in the IEEE 1394 interface.
Hardware Problem NV-RAM An error has occurred in the optional Account Enhance Unit.