Operating instructions administrator reference – Ricoh MIB-II User Manual
Page 60
Operating Instructions
Administrator Reference
60
C
As necessary, type the names to distinguish the printer in
[
IPP Port Name
]
. Type a different
name from those of any existing port name.
If you omit this, the address typed in
[
Printer URL
]
will be set as the IPP port name.
D
If a proxy server and IPP user name are used, click
[
Detailed Settings
]
and configure the
necessary settings.
Note
❒
For more information about these settings, see SmartNetMonitor for Client Help.
E
Click
[
OK
]
.
LPR Port
A Click
[
Add
]
.
B Select
[
LPR Port
]
, and then click
[
OK
]
.
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click
[
OK
]
.
JJJJ
Make sure the location for the selected printer is shown after
[
Port:
]
.
KKKK
Double-click
[
Shared
]
to display the shared settings.
LLLL
To share the printer, check the left side of the
[
Shared
]
box.
MMMM
Click the box under
[
Shared name
]
to install the alternative driver for the necessary system.
Note
❒
Check [
Shared
] to start installation of an alternative driver ([
Windows NT 4.0/2000
], [
Windows 95/98
])
has already been selected.
❒
You can add an alternative driver after installation. See