Ricoh MIB-II - Manual (Page 90)

Operating Instructions Administrator Reference
90
C In the [ Print Queue name ] box, type the name of the print queue.
D In the [ Print Queue Volume ] box, click the [ Browse ] button.
E In the [ Available objects ] box, click the volume in which the print queue is created, and then
click [ OK ] .
F After confirming the settings, click [ Create ] .
JJJJ
Create a printer as follows:
A Select the container object the printer is located in, and then click
[ Create ] in the [ Object ]
menu.
B In the [ Class of new object ] box, click "Printer", and then click [ OK ] . When you are using
NetWare 5, click "Printer (Non NDPS)".
C In the [ Printer name ] box, type the name of the printer.
D Click [ Define additional properties ] to check a box, and then click [ Create ] .
KKKK
Assign print queues to the created printer as follows:
A Click
[ Assignments ] , and then click [ Add ] in the [ Assignments ] group.
B In the [ Available objects ] box, click the queue created in step I , and then click [ OK ] .
C Click [ Configuration ] , and in the [ Printer type ] box, select [ Parallel ] using the drop-down
menu, and then click [ Communication ] .
D Click [ Manual load ] in the [ Communication type ] group, and then click [ OK ] .
E After confirming the settings, click [ OK ] .
LLLL
Create a print server as follows:
A Select the context specified using the NIB Setup Tool (Step
I -
A A A A
), and on the [ Object ]
menu, click [ Create ] .