Texas Instruments MSP430x4xx - Manual (Page 258)

14-1 USART Peripheral Interface, UART Mode
USART Peripheral Interface, UART Mode
The universal synchronous/asynchronous receive/transmit (USART)
peripheral interface supports two serial modes with one hardware module.
This chapter discusses the operation of the asynchronous UART mode.
USART0 is implemented on the MSP430x42x and MSP430x43x devices. In
addition to USART0, the MSP430x44x devices implement a second identical
USART module, USART1.
Topic Page
14.1 USART Introduction: UART Mode 14-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.2 USART Operation: UART Mode 14-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14.3 USART Registers: UART Mode 14-21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 14