Texas Instruments MSP430x4xx - Manual (Page 94)

Instruction Set
3-60 RISC 16−Bit CPU
RRA[.W] Rotate right arithmetically
RRA.B Rotate right arithmetically
Syntax RRA dst or RRA.W dst
RRA.B dst
Operation MSB −> MSB, MSB −> MSB−1, ... LSB+1 −> LSB, LSB −> C
Description The destination operand is shifted right one position as shown in Figure 3−16.
The MSB is shifted into the MSB, the MSB is shifted into the MSB−1, and the
LSB+1 is shifted into the LSB.
Figure 3−16. Destination Operand—Arithmetic Right Shift
15 0
15 0
C
Byte
Word
Status Bits N: Set if result is negative, reset if positive
Z: Set if result is zero, reset otherwise
C: Loaded from the LSB
V: Reset
Mode Bits OSCOFF, CPUOFF, and GIE are not affected.
Example R5 is shifted right one position. The MSB retains the old value. It operates
equal to an arithmetic division by 2.
RRA R5 ; R5/2 −> R5
; The value in R5 is multiplied by 0.75 (0.5 + 0.25).
;
PUSH R5 ; Hold R5 temporarily using stack
RRA R5 ; R5
×
0.5 −> R5
ADD @SP+,R5 ; R5
×
0.5 + R5 = 1.5
×
R5 −> R5
RRA R5 ; (1.5
×
R5)
Ч
0.5 = 0.75
Ч
R5 −> R5
......
Example The low byte of R5 is shifted right one position. The MSB retains the old value.
It operates equal to an arithmetic division by 2.
RRA.B R5 ; R5/2 −> R5: operation is on low byte only
; High byte of R5 is reset
PUSH.B R5 ; R5
×
0.5 −> TOS
RRA.B @SP ; TOS
Ч
0.5 = 0.5
Ч
R5
Ч
0.5 = 0.25
Ч
R5 −> TOS
ADD.B @SP+,R5 ; R5
×
0.5 + R5
Ч
0.25 = 0.75
Ч
R5 −> R5
......