Texas Instruments MSP430x4xx - Manual (Page 443)

SD16_A Registers
22-17 SD16_A
SD16
LSBACC Bit 6 LSB access. This bit allows access to the upper or lower 16-bits of the
SD16_A conversion result.
0
SD16MEMx contains the most significant 16-bits of the conversion.
1 SD16MEMx contains the least significant 16-bits of the conversion.
SD16OVIFG Bit 5 SD16_A overflow interrupt flag
0
No overflow interrupt pending
1 Overflow interrupt pending
SD16DF Bit 4 SD16_A data format
0
Offset binary
1 2’s complement
SD16IE Bit 3 SD16_A interrupt enable
0
Disabled
1 Enabled
SD16IFG Bit 2 SD16_A interrupt flag. SD16IFG is set when new conversion results are
available. SD16IFG is automatically reset when the corresponding
SD16MEMx register is read, or may be cleared with software.
0
No interrupt pending
1 Interrupt pending
SD16SC Bit 1 SD16_A start conversion
0
No conversion start
1 Start conversion
Reserved Bit 0 Reserved