Texas Instruments MSP430x4xx - Manual (Page 504)

Scan IF Registers
24-44 Scan IF
SIFCTL3, Scan IF Control Register 3
15 14 13 12 11 10 9 8
SIFS2x SIFS1x SIFIS2x SIFIS1x
rw−(0) rw−(0) rw−(0) rw−(0) rw−(0) rw−(0) rw−(0) rw−(0)
7 6 5 4 3 2 1 0
SIFCS SIFIFGSETx SIF3OUT SIF2OUT SIF1OUT SIF0OUT
rw−(0) rw−(0) rw−(0) rw−(0) r−(0) r−(0) r−(0) r−(0)
SIFS2x Bits
15-14 S2 source select. These bits select the S2 source for the PSM when SIFCS
= 1.
00
SIF0OUT is the S2 source.
01 SIF1OUT is the S2 source.
10 SIF2OUT is the S2 source.
11 SIF3OUT is the S2 source.
SIFS1x Bits
13-12 S1 source select. These bits select the S1 source fro the PSM when SIFCS
= 1.
00
SIF0OUT is the S1 source.
01 SIF1OUT is the S1 source.
10 SIF2OUT is the S1 source.
11 SIF3OUT is the S1 source.
SIFIS2x Bits
11-10 SIFIFG4 interrupt flag source
00
SIFIFG4 is set with each count of SIFCNT2.
01 SIFIFG4 is set if (SIFCNT2 modulo 4) = 0.
10 SIFIFG4 is set if (SIFCNT2 modulo 64) = 0.
11 SIFIFG4 is set when SIFCNT2 decrements from 01h to 00h.
SIFIS1x Bits
9-8 SIFIFG3 interrupt flag source
00
SIFIFG3 is set with each count, up or down, of SIFCNT1.
01 SIFIFG3 is set if (SIFCNT1 modulo 4) = 0.
10 SIFIFG3 is set if (SIFCNT1 modulo 64) = 0.
11 SIFIFG3 is set when SIFCNT1 rolls over from 0FFh to 00h.
SIFCS Bit 7 Comparator output/Timer_A input selection
0
The SIFEX(tsm) signal and the comparator output are connected to the
TACCRx inputs.
1 The SIFxOUT outputs are connected to the TACCRx inputs selected
with the SIFS1x and SIFS2x bits.