10 understanding the status bar – Xylem 6-Series Multiparameter User Manual

Page 147

Advertising
background image

650 MDS

Section 3

YSI Environmental Monitoring Systems Operations Manual

3-17

Section 3.11 of this manual. If symptoms persist after these actions, consult YSI Technical Support for

advice.



3.2.10 UNDERSTANDING THE STATUS BAR

The diagram below shows the various components of the Status Bar of your 650. Each item identified in the

drawing is explained in detail below.



2.10.1 Date and Time. This is the date and time for the clock in the 650, set by the user from the System

setup menu as described above. The date and time entries are updated in real-time in the Status Bar.

2.10.2 GPS Reading. This value will be present only if a user-supplied GPS unit with NMEA 0183 format

is connected to the 650 by the optional YSI 6115 cable. The setup of a GPS interface is described in more

detail in Section 3.8 below. Once properly connected to a GPS instrument, the values displayed in the

Status Bar are updated in real-time as the system is moved from location to location.

2.10.3 Barometer Reading. This value is the current local barometer reading in units selected by the user

in the System setup menu. The value is can be used simply as a meteorological parameter or can be used

in calibration of sonde dissolved oxygen sensors. The barometer reading is NOT corrected to sea level and

is updated in real-time.

2.10.4 Battery Capacity Status. The graphic indicator shows the portion of the battery capacity that is

remaining, either for the 4-C cell configuration or for the optional rechargeable battery pack. If a 6117

rechargeable battery pack is in place, a “NiMH” label will appear as part of the indicator. During charging

of the battery pack, the black portion of the icon will pulse horizontally until charging is complete. In

addition, the entire battery indicator will flash when your batteries are almost exhausted and require

replacement (C-cells) or recharge (optional rechargeable battery pack).

2.10.5 Menu Indicator. This icon is located in the lower right portion of the Status Bar and provides a

guide as to whether the menu on the display of the 650 originates in the sonde or the 650 itself. The icon

shown in the figure above represents a 650 menu; if the menu on the display had originated in the sonde,

the Status bar would display a sonde-like icon as shown below.

Main Display

Status Bar

Date and Time

GPS Reading

Barometer Reading

Battery Capacity Status

Menu Indicator

Advertising
This manual is related to the following products: