600xlm sonde, 600xl sonde – Xylem 6-Series Multiparameter User Manual

Page 369

Advertising
background image

Specifications

Appendix O

YSI Incorporated

Environmental Monitoring Systems Operations Manual

O-6

600XLM SONDE

Available Sensors

Temperature, Conductivity, Dissolved Oxygen (Rapid Pulse Polarographic Only)

pH, ORP, Depth (shallow, medium, shallow vented).

Operating Environment Medium: fresh, sea, or polluted water

Temperature :-5 to +50

C for most sensors

Depth: 0 to 200 feet (61 meters)

Storage Temperature: -40 to +60

C for sonde and all sensors except pH and pH/ORP

-10 to +60

C for pH and pH/ORP sensors

Material:

PVC, Stainless Steel

Diameter:

1.65 inches (4.2 cm)

Length:

21.3 inches (54.1 cm) with no depth; 23.3 inches (59.2 cm) with depth

Weight:

1.48 pounds (0.67 kg) (with batteries, without bottom weight)

Computer Interface:

RS-232C, SDI-12

Internal logging

memory size:

384 kilobytes (150,000 individual parameter readings)

Power:

4 AA-size Alkaline Batteries or External 12 VDC

Battery Life:

Approximately 30 days at 20 C at a 15 minute logging interval with temperature,

conductivity, pH/ORP, and Rapid Pulse DO with a 60-second DO warm up time

active. Battery life is heavily dependent on sensor configuration and is given

above for a typical sensor ensemble. If you have a different sensor configuration,

set up your sonde for a deployment in the Run|Unattended menu and check the

projected approximate battery life.

600XL SONDE

Available Sensors

Temperature, Conductivity, Dissolved Oxygen (Rapid Pulse Polarographic Only),

pH, ORP, Depth (shallow, medium, shallow vented)

Operating Environment Medium: fresh, sea, or polluted water

Temperature: -5 to +50

C for most sensors

Depth: 0 to 200 feet (61 meters)

Storage Temperature: -40 to +60

C for sonde and all sensors except pH and pH/ORP

-10 to +60

C for pH and pH/ORP sensors

Material:

PVC, Stainless Steel

Diameter:

1.65 inches (4.2 cm)

Length:

15.25 inches (38.7 cm) from bottom of probe guard to top of connector with no

depth and no weight. Add 2 inches (5.1 cm) for depth; add 0.75 inches (1.9 cm)

for bottom weight)

Weight:

1.07 pounds (0.49 kg) (without bottom weight)

Advertising
This manual is related to the following products: