14 chlorophyll, Introduction – Xylem 6-Series Multiparameter User Manual

Page 259

Advertising
background image

Principles of Operation

Section 5

YSI Incorporated

Environmental Monitoring Systems Manual

5-21

For most unattended sampling applications, selection of the above filter settings should also be appropriate.

However, an additional capability is also available which enhances the elimination of spurious single point

spikes from the logged data and thus allows for a better presentation of the average turbidity during the

deployment. This “Turb Spike Filter” is activated/deactivated in the Advanced|Sensor menu. Its

capability is further described in Section 2.9.8, Advanced. YSI recommends the use of this feature for all

unattended studies. The user should determine from experience whether its activation is also appropriate

for spot sampling studies at particular sites.

See Appendix E, Turbidity Measurements for additional practical information on the measurement of

turbidity with 6-series sondes.

5.14

CHLOROPHYLL


INTRODUCTION

Chlorophyll, in various forms, is bound within the living cells of algae, phytoplankton, and other plant

matter found in environmental water. Chlorophyll is a key biochemical component in the molecular

apparatus that is responsible for photosynthesis, the critical process in which the energy from sunlight is

used to produce life-sustaining oxygen. In general, the amount of chlorophyll in a collected water sample

is used as a measure of the concentration of suspended phytoplankton, the magnitude of which can

significantly affect the overall quality of the water.

The use of the measurement of phytoplankton as an indicator of water quality is described in Section 10200

A. of Standard Methods for the Examination of Water and Wastewater. The classical method of

determining the quantity of chlorophyll at a particular site is to collect a fairly large water sample and

analyze it in the laboratory. The procedure involves filtration of the sample to concentrate the chlorophyll

containing organisms, mechanical rupturing of the collected cells, and extraction of the chlorophyll from

the disrupted cells into the organic solvent, acetone. The extract is then analyzed by either a

spectrophotometric method using the known optical properties of chlorophyll or by high performance

liquid chromatography (HPLC). This general method is detailed in Section 10200 H. of Standard Method

and has been shown to be accurate in multiple tests and applications as long as a competent laboratory

analyst carries out the protocol. The procedure is generally accepted for reporting in scientific literature.

The method is time-consuming, however, and usually requires an experienced, efficient analyst to generate

consistently accurate and reproducible results. It also does not lend itself readily to continuous monitoring

of chlorophyll, and thus phytoplankton, since the collection of samples at reasonable time intervals, e.g.,

every hour, would be extremely tedious.

YSI has developed the YSI 6025 chlorophyll sensor for the determination of chlorophyll in spot sampling

and continuous monitoring applications. It is based on an alternative method for the measurement of

chlorophyll which overcomes these disadvantages, albeit with the potential loss of accuracy. In this

procedure, chlorophyll is determined in vivo, i.e., without disrupting the cells as in the extractive analysis.

The YSI 6025 chlorophyll sensor is designed for these in vivo applications and its use allows the facile

collection of large quantities of chlorophyll data in either spot sampling or continuous monitoring

applications. It is important to remember, however, that the results of in vivo analysis will not be as

accurate as those from the certified extractive analysis procedure.

The limitations of the in vivo method are outlined below and should be carefully considered before making

chlorophyll determinations with your YSI sonde and sensor. Some of the sources of inaccuracy can be

minimized by combining the data from the YSI 6025 with data from extractive analysis of a few samples

acquired during a sampling or monitoring study. However, the in vivo studies will never replace the

standard procedure. Rather, the estimates of chlorophyll concentration from the easy-to-use YSI

Advertising
This manual is related to the following products: