Xylem 6-Series Multiparameter - Manual (Page 207)

EcoWatch for Windows Section 4
YSI Incorporated Environmental Monitoring Systems Manual 4-11
4.2.5 GRAPH DATA IN REAL TIME
Choosing the New command from the Real-time menu will bring up a window with graphs that plot data
from the sonde as the measurements are being taken. If you do not have a default COM port set in the
Communications Settings dialog, then you will be asked which COM port to use for the real-time
measurements. If you do have a default port selected, then the program will use that port automatically.
The number of parameters displayed during real-time is set by the sonde. If four parameters are set in the
Report setup in the sonde, then those same parameters will be displayed in real-time. If you want to change
the parameters displayed, then you must close the real-time window, open a sonde terminal window,
change the number of parameters in the sonde software menu, and then return to real-time measurements.
The Settings command in the Real-time menu takes you to a dialog where you can set the x-axis time and
the sample interval.