Xylem 6-Series Multiparameter User Manual

Page 235

Advertising
background image

EcoWatch for Windows

Section 4

YSI Incorporated

Environmental Monitoring Systems Manual

4-39

Note that there are two color buttons, one for the trace color and the other for the

background color. Clicking on either of these buttons will take you to the Color dialog

box where you can change the color.

Use the Set All buttons to quickly set all traces or backgrounds to the same color.

Page Title

This is where you can enter a title for the graph. The title may have one or two lines.

1 Trace per Graph

Choose this to have just one parameter on each graph.

2 Traces per Graph

Choose this to have two parameters on each graph.


TABLE

If there is no table, then the commands on this submenu will be unavailable. The Table submenu offers the

following commands:

Font/Color

Goes to the Font Dialog Box where you can change the font and color of text that appears

in the table.

Page Color

Goes to the Color Dialog Box where you can change the color of the table background

color. That is the part of the table where the readings appear.

Highlight Color

Goes to the Color Dialog Box where you can change the color of the table highlight

color. That is the part of the table where the reading units appear.

SET DEFAULT TEMPLATE

This option allows you to select display parameters for your data when you initially open a file in

EcoWatch. Display parameters include background and trace colors on your graph, which

parameters are displayed, parameter ordering, parameter units, and scaling of those parameters

(either manual or automatic). The first time you use EcoWatch with a data file, graphing will

proceed according to the default settings present in EcoWatch. For example, graph backgrounds

will all be black, traces will be plotted each with a different color, all parameters will be auto-

scaled, and if your sonde measures conductivity and dissolved oxygen, EcoWatch will display

specific conductance in mS/cm and dissolved oxygen in mg/L. You can change the default

settings by using Set Default Template.

Advertising
This manual is related to the following products: