Xylem 6-Series Multiparameter - Manual (Page 74)

Sondes Section 2
YSI Incorporated Environmental Monitoring Systems Operations Manual 2-68
2.9 SONDE MENU
The functions of the sondes are accessible through the sonde menu. The sonde menu structure makes it
simple and convenient to select functions. This section provides a description of the menus and their
capabilities.
When moving between menus within the sonde software structure, use the 0 or Esc to back up to the
previous menu. To exit menus and return to the sonde command line (the # sign), press 0 or Esc until the
question “Exit menu (Y/N)?” appears. Type Y and the command prompt (“#”) will be shown. To return
to the Main sonde menu, type menu and press Enter.
To gain experience with the sonde menus, select the sonde icon in EcoWatch for Windows and press
Enter. See Figure 40 above for the Sonde Menu Flow Chart.
In the following subsections you will learn about the functions of the various menu items and when to use
them. The discussion of the menu and submenu functions is organized in numerical order, beginning with
Section 2.9.1 Run
IMPORTANT MESSAGE!
WHAT IF THERE IS NO RESPONSE TO A KEYSTROKE?
To save power, the sondes will power down automatically if no interaction from the keyboard occurs for
approximately 60 seconds. When the software is in this “sleep” mode, the first subsequent keystroke
simply “wakes it up” and has no visible effect on the display. The next keystroke after the unit is
“awakened” will be input to the software in the intended manner. Thus, if you press a key after the sonde
has been inactive for some time and nothing seems to happen, press the key again.