Yokogawa 2-Wire Dual Channel Transmitter/Analyzer FLXA21 - Manual (Page 83)

<6. OPERATION OF SC (Conductivity)>
6-3
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
Temp.element Pt1000
Unit °C
Next
Start quick setup?
Yes
No
Chanage language
Quick setup
Format YYYY/MM/DD
Date 2010/03/03
Time 17:04:07
Date/Time
Process parameter
Conduct1-TC1
0% value 0.000 nS/cm
100% value 500.0 µS/cm
Finish
mA(output)
Temperature settings
Measure Conductivity
Next
Measurement setup
Sensor type 2-electrode
Measuring unit /cm
Cell constant 0.1000 /cm
(factory)
Next
Configure sensor
°C
°F
Conductivity
Resistitivity
Concentration
Conduct.+Concenter.
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
/cm
/m
2-electrode
4-electrode
Pt1000
Pt100
Ni100
8k55
Pb36(JIS6k)
Next
Next
Next
Finish
Next
Monitor display
Conduct1-TC1
Temperature1
Concent1-TC1
Concent1-TC2
Conduct1-TC2
Resist1-TC1
Resist1-TC2
Conduct2-TC1
Temperature2
Conduct2-TC2
Calculated
Redundant
*1
*1: If two sensors are connected, the second sensor can also be set up.
Figure 6.2 Quick setup
n Date/Time
The date display format can be selected from among the three types.
Enter the date or time of day by using the numerical keys.
For details, see section 7.5.4.
n Measurement setup
Select a suitable measurement parameter from among those displayed and set it up.
Measurement parameter setup can be made only when “SC” is selected on the Sensor setup
screen.
For details, see section 7.1.1.
SC
6