Yokogawa PC-Based MX100 - Manual (Page 11)

1-4
SM MX100-01E
Display While Processing Is in Progress
The displays shown below repeats when there is access to the CF card, when the CF
card is being formatted, or when calibratior is taking place.
Unit Confirmation Display
The figure below shows the display that appears when you confirm the MX100 Data
Acquisition Unit that is connected using the MX100 Standard Software or MXLOGGER
(software sold separately). The word “—CALL—” flows through the display from right to left.
For details on the display and meaning of operation errors, see section 3.1 “Error Display
on the 7-Segment LED and Corrective Actions” of the user’s manual (IM MW100-01E).
1.2 MX100 Main Module Functions