Yokogawa PC-Based MX100 - Manual (Page 145)

7-5
SM MX100-01E
Procedures for Disassembly
1
2
3
4
5
6
7
Remove the Module Case
8. Free the tabs indicated by the arrows in the figure below with a pair of tweezers,
then pull out the Module Case and Module Back Plate.
Module Case
Module Back Plate
9. Remove the Module Case and the Module Back Plate.
Remove the Module Back Plate
10. Remove the 4 screws and 1 stud as shown in the figure below.
7.2 Disassembling the MX110 Analog Input Module