Yokogawa PC-Based MX100 - Manual (Page 144)

7-4
SM MX100-01E
Remove the Plate
Plate
6. Free the tabs indicated by the arrows in the figure below with a pair of tweezers (2
on the left and right sides for a total of 4).
7. Lift up the upper and lower parts of the Plate in the figure above, then pull the
Plate out being careful not to touch the 2 printed circuit boards.
Unit with the Plate removed
Printed circuit boards
Plate
7.2 Disassembling the MX110 Analog Input Module