Yokogawa PC-Based MX100 - Manual (Page 167)

7-27
SM MX100-01E
Procedures for Disassembly
1
2
3
4
5
6
7
7.6.2 Disassembling the MX120-PWM-M08
1. Remove the terminal cover, then remove the terminal block.
RECT Cable Connector
TR Cover removed
2. Remove the screw.
3. Remove the 4 latches from the left and right sides of the Bezel.
7.6 Disassembling the MX120 Medium-Speed Analog Output Module and the Medium-Speed PWM Output Module