Yokogawa PC-Based MX100 - Manual (Page 175)

7-35
SM MX100-01E
Procedures for Disassembly
1
2
3
4
5
6
7
3. Remove the CPU Back Plate.
CPU Back Plate removed
CPU Back Plate
Remove the Heat Sink
4. Remove the 2 screws as shown in the figure below.
Heat think
5. Remove the Heat Sink.
Remove the CPU Assembly
6. The figure in step 5 as is shown in the figure below as seen from the left side.
Remove the connectors shown by the arrows.
7.9 Disassembling the MX100 Main Module