GW Instek GSP-930 Programming Manual - Manual (Page 104)

GSP-930 Programming Manual
102
Example :DISP:SPL:SPEC
:DISPlay[:WINDow]:SPLit:TOPO
Set
Description Sets the split screen mode to Topographic +
Spectrum.
Syntax :DISPlay[:WINDow]:SPLit:TOPO
Example :DISP:SPL:TOPO
:DISPlay[:WINDow]:TOPO
Set
Description Sets the display window to topographic.
Syntax :DISPlay[:WINDow]:TOPO
Example :DISP:TOPO
:DISPlay[:WINDow]:TRACe<n>:MODE
Set
Description Sets the operation mode of the selected trace.
Syntax :DISPlay[:WINDow]:TRACe<n>:MODE
{WRITe|VIEW|BLANk|MAXHold|MINHold}
Parameter <n> <NR1> Trace number 1~4
WRITe Clear and Write
VIEW Hold the last trace
BLANK Clears the trace
MAXHold Hold the maximum/minimum points
from each sweep MINHold
Example :DISP:TRAC4:MODE VIEW
:DISPlay[:WINDow]:TRACe:Y:DLINe
Set
Query
Description Sets or queries the display line amplitude level.
Syntax :DISPlay[:WINDow]:TRACe:Y:DLINe <ampl>
Query Syntax :DISPlay[:WINDow]:TRACe:Y:DLINe?