GW Instek GSP-930 Programming Manual - Manual (Page 144)

GSP-930 Programming Manual
142
Query Syntax [:SENSe]:PMETer:RECording:TIME:STEP?
Parameter <time> <NRf>
Return parameter <NR3> seconds
Example :PMET:REC:TIME:STEP 10s
[:SENSe]:POWer[:RF]:GAIN
Set
Query
Description Sets the preamplifier to Auto or Bypass mode or
queries its state.
Syntax [:SENSe]:POWer[:RF]:GAIN {AUTO|BYPASS}
Query Syntax [:SENSe]:POWer[:RF]:GAIN?
Parameter/
Return parameter AUTO Sets the preamplifier to auto mode.
BYPASS Sets the preamplifier to bypass mode.
Example :POW:GAIN AUTO
[:SENSe]:SEMask:BANDwidth|BWIDth:
INTegration
Set
Query
Description Sets or queries the channel integration bandwidth
for SEM measurements (user defined only).
Syntax [:SENSe]:SEMask:BANDwidth|BWIDth:INTegration
<freq>
Query Syntax [:SENSe]:SEMask:BANDwidth|BWIDth:INTegration?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example :SEM:BAND:INT 3.84e+6