GW Instek GSP-930 Programming Manual - Manual (Page 132)

GSP-930 Programming Manual
130
[:SENSe]:CORRection:CSET<n>:STATe
Set
Query
Description Turns the selected correction set on/off or queries
its state.
Syntax [:SENSe]:CORRection:CSET<n>:STATe {OFF|ON|0|1}
Query Syntax [:SENSe]:CORRection:CSET<n>:STATe?
Parameter 0 Turn turn the selected correction set off.
1 Turn turn the selected correction set on.
OFF Turn turn the selected correction set off.
ON Turn turn the selected correction set on.
<n> <NR1>correction set number
Return parameter 0 The selected correction set is off.
1 The selected correction set is on.
Example :CORR:CSET1:STAT ON
[:SENSe]:CORRection:CSET<n>:DELete
Set
Description Deletes the chosen correction set.
Syntax [:SENSe]:CORRection:CSET<n>:DELete
Parameter <n> <NR1>correction set number
Example :CORR:CSET1:DEL 2
[:SENSe]:CSO:CHANnel:SPACe
Set
Query
Description Sets the channel space bandwidth for CSO
measurements.
Syntax [:SENSe]:CSO:CHANnel:SPACe <freq>
Query Syntax [:SENSe]:CSO:CHANnel:SPACe?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example :CSO:CHAN:SPAC 6.0e+6