GW Instek GSP-930 Programming Manual - Manual (Page 137)

REMOTE CONTROL
135
[:SENSe]:FREQuency:CENTer
Set
Query
Description Sets or queries the center frequency.
Syntax [:SENSe]:FREQuency:CENTer <freq>
Query Syntax [:SENSe]:FREQuency:CENTer?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example FREQ:CENT 1.0e+9
[:SENSe]:FREQuency:CENTer:STEP
Set
Query
Description Sets or queries the CF Step frequency.
Syntax [:SENSe]:FREQuency:CENTer:STEP <freq>
Query Syntax [:SENSe]:FREQuency:CENTer:STEP?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example FREQ:CENT:STEP 1.0e+3
[:SENSe]:FREQuency:CENTer:STEP:AUTO
Set
Query
Description Turns the CF Step frequency setting to auto (on) or
manual (off) or queries its state.
Syntax [:SENSe]:FREQuency:CENTer:STEP:AUTO
{OFF|ON|0|1}
Query Syntax [:SENSe]:FREQuency:CENTer:STEP:AUTO?
Parameter 0 Turn CF Step to manual (off).
1 Turn CF Step to auto (on).
OFF Turn CF Step to manual (off).
ON Turn CF Step to auto (on).
Return parameter 0 CF Step is set to manual.
1 CF Step is set to automatic.