GW Instek GSP-930 Programming Manual - Manual (Page 148)

GSP-930 Programming Manual
146
Example :SEM:HELP:STATE 1
[:SENSe]:SEMask:NWLan:CHANnel:
BANDwidth|BWIDth
Set
Query
Description Sets the channel bandwidth for the 802.11n SEM
measurement. Only 20MHz or 40MHz can be used.
Syntax [:SENSe]:SEMask:NWLan:CHANnel:
BANDwidth|BWIDth <freq>
Parameter <freq> <NRf> (20 MHz or 40MHz)
Return parameter <NR3>
Example :SEM:NWL:CHAN:BAND 20 MHZ
[:SENSe]:SEMask:OFFSet<n>:ADDition:
BANDwidth|BWIDth[:RESolution]?
Query
Description Returns the RBW of the selected offset for the
additional requirements of the selected 3GPP SEM
test.
Query syntax [:SENSe]:SEMask:OFFSet<n>:ADDition:
BANDwidth|BWIDth[:RESolution]?
3GPP-FDD BS
Additional
Requirements For operation in bands II, IV, V, X, XII, XIII, XIV and
XXV, additional requirements (listed below) apply in
addition to the minimum requirements listed above.
For 3GPP-FDD UE
A means <1>
B means <2>
(UM P138)