GW Instek GSP-930 Programming Manual - Manual (Page 136)

GSP-930 Programming Manual
134
Parameter 0 Turn the detection mode to manual (off).
1 Turn the detection mode to auto (on).
OFF Turn the detection mode to manual (off).
ON Turn the detection mode to auto (on).
Return parameter 0 The detection mode is set to manual.
1 The detection mode is set to automatic.
Example :DET:AUTO ON
[:SENSe]:EMIFilter:STATe
Set
Query
Description Turns the EMI filter on/off or queries its state.
Syntax [:SENSe]:EMIFilter:STATe {OFF|ON|0|1}
Query Syntax [:SENSe]:EMIFilter:STATe?
Parameter 0 Turn the EMI filter off.
1 Turn the EMI filter on.
OFF Turn the EMI filter off.
ON Turn the EMI filter on.
Return parameter 0 The EMI filter is off.
1 The EMI filter is on.
Example :EMI:STAT 0
[:SENSe]:EMIFilter:BANDwidth|BWIDth
[:RESolution]
Set
Description Sets the EMI filter bandwidth (must be set to the
exact bandwidth).
Syntax [:SENSe]:EMIFilter:BANDwidth|BWIDth[:RESolution]
<freq>
Parameter <freq> <NRf>
(Only 200Hz, 9kHz, 120kHz are valid
settings)
Example :EMIF:BAND 2.0e+2