GW Instek GSP-930 Programming Manual - Manual (Page 96)

GSP-930 Programming Manual
94
Return parameter <base lower> <NR3> dBc
<base upper> <NR3> dBc
<3 rd order lower> <NR3> dBc
<3 rd order upper> <NR3> dBc
Example :CALC:TOI:DIFF?
>0.0e+0,-1.67e-1,-1.09e+1,-6.61e+0
:CALCulate:TOI:FREQuency:DIFFerential?
Query
Description Returns the delta of the base lower frequency and
base upper frequency.
Query syntax :CALCulate:TOI:FREQuency:STEPsize?
Return parameter <NR3> Δf: Hz
Example :CALC:TOI:FREQ:DIFF?
>6.65e+5
:CALCulate:TOI:LIMit:STATe
Set
Query
Description Turns the TOI pass/fail limit on/off or queries its
state.
Syntax :CALCulate:TOI:LIMit:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:TOI:LIMit:STATe?
Parameter 0 Turns pass/fail limit off.
1 Turns pass/fail limit on.
OFF Turns pass/fail limit off.
ON Turns pass/fail limit on.
Return parameter 0 Turns pass/fail limit off.
1 Turns pass/fail limit on.
Example :CALC:TOI:LIM:STAT ON
:CALCulate:TOI:RESult?
Query
Description Returns the third order intercept and the pass/fail
judgments.