GW Instek GSP-930 Programming Manual - Manual (Page 145)

REMOTE CONTROL
143
[:SENSe]:SEMask:BANDwidth|BWIDth
[:RESolution]
Set
Query
Description Sets or queries the RBW for SEM measurements.
Syntax [:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]
<freq>
Query Syntax [:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]?
Parameter <freq> <NRf>
Return parameter <NR3> Hz
Example :SEM:BAND 2.2e+4
[:SENSe]:SEMask:BANDwidth|BWIDth
[:RESolution]:AUTO
Set
Query
Description Turns the RBW setting to auto (on) or manual (off)
for SEM measurements or queries its state.
Syntax [:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]:
AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:SEMask:BANDwidth|BWIDth[:RESolution]:
AUTO?
Parameter 0 Turn RBW to manual (off).
1 Turn RBW to auto (on).
OFF Turn RBW to manual (off).
ON Turn RBW to auto (on).
Return parameter 0 RBW is set to manual.
1 RBW is set to automatic.
Example :SEM:BAND: AUTO OFF
[:SENSe]:SEMask:CARRier:AUTO
Set
Query
Description Turns the PSDRef or TotalPwrRef modes to auto
(on) or manual (off) for SEM measurements or
queries their state.