GW Instek GSP-930 Programming Manual - Manual (Page 163)

REMOTE CONTROL
161
Syntax [:SENSe]:SWEep:TIME:AUTO {OFF|ON|0|1}
Query Syntax [:SENSe]:SWEep:TIME:AUTO?
Parameter 0 Turn sweep time to manual (off).
1 Turn sweep time to auto (on).
OFF Turn sweep time to manual (off).
ON Turn sweep time to auto (on).
Return parameter 0 Sweep time is set to manual.
1 Sweep time is set to automatic.
Example :SWE:TIME:AUTO 0
[:SENSe]:TOI:REFerence
Set
Query
Description Sets or queries the TOI reference to the upper or
lower base.
Syntax [:SENSe]:TOI:REFerence {UPPer|LOWer}
Query Syntax [:SENSe]:TOI:REFerence?
Parameter/
Return parameter UPPer Upper base.
LOWer Lower base.
Example :TOI:REF UPP
[:SENSe]:TOI:LIMit
Set
Query
Description Sets the TOI pass/fail limit amplitude.
Syntax [:SENSe]:TOI:LIMit <ampl>
Query Syntax [:SENSe]:TOI:LIMit?
Parameter <ampl> <NRf>Power or voltage
Return parameter <NR3>
Example TOI:LIM 30
SOURce Commands
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude] ... 162
:SOURce:POWer[:LEVel][:IMMediate][:AMPLitude]