GW Instek GSP-930 Programming Manual - Manual (Page 40)

GSP-930 Programming Manual
38
Common
Input Parameters Type Description Example
<Boolean> Boolean logic 0, 1
<NR1> integers 0, 1, 2, 3
<NR2> decimal
numbers 0.1, 3.14, 8.5
<NR3> floating point 4.5e-1, 8.25e+1
<NRf> any of NR1, 2, 3 1, 1.5, 4.5e-1
<freq> Input:
<NRf> + unit
2.5 mhz
Unit = kHz, MHz, GHz.
Note: The unit can be omitted
(unit defaults to Hz).
Return:
<NR3>
2.5e+5
Note: Units = Hz.
<limit num> <NR1>
<point> <NR1>
<offset> Input:
<NRf> + unit
30 db
Note: The unit can be omitted
(unit defaults to dB).
Return:
<NR3>
3.0e+1
Note: Units = dB.
<rel_ampl> Input:
<NRf> + unit
20 db
Note: The unit can be omitted
(unit defaults to dB).
Return:
<NR3>
2.0e+1
Note: Units = dB.