GW Instek GSP-930 Programming Manual - Manual (Page 191)

REMOTE CONTROL
189
:TRIGger[:SEQuence]:DEMod:LEVel
Set
Query
Description Sets the trigger level for AM/FM demodulation.
Syntax :TRIGger[:SEQuence]:DEMod:LEVel <NRf>
Query Syntax :TRIGger[:SEQuence]:DEMod:LEVel?
Parameter <NRf> AM unit =%
FM unit = Hz
Return parameter <NR3>
Example :TRIG:DEM:LEV 10
:TRIGger[:SEQuence]:DEMod:MODE
Set
Query
Description Sets the triggering mode for the AF Trigger in
AM/FM demodulation.
Syntax :TRIGger[:SEQuence]:DEMod:MODE
{NORMal|SINGle|CONTinuous}
Query Syntax :TRIGger[:SEQuence]:DEMod:MODE?
Parameter/
Return parameter NORMal Normal trigger mode
SINGle Single trigger
CONTinuous Continuous trigger
Example :TRIG:DEM:MODE CONT
:TRIGger[:SEQuence]:DEMod:SLOPe
Set
Query
Description Sets the trigger slope.
Syntax :TRIGger[:SEQuence]:DEMod:SLOPe
{POSitive|NEGative}
Query Syntax :TRIGger[:SEQuence]:DEMod:SLOPe?
Parameter/
Return parameter POSitive Positive slope
NEGative Negative slope
Example :TRIG:DEM:SLOP POS