GW Instek GSP-930 Programming Manual - Manual (Page 116)

GSP-930 Programming Manual
114
Syntax :MMEMory:LOAD:SEQuence <seq num>,
<src_file_name>
Parameter <seq num> <NR1>sequence number 1~5
<src_file_name> XXX.seq
Example :MMEM:LOAD:SEQ 2,test.seq
:MMEMory:LOAD:STATe
Set
Description Loads the instrument state from a file to the
internal memory.
Syntax :MMEMory:LOAD:STATe <src_file_name>
Parameter <src_file_name> XXX.stat
Example :MMEM:LOAD:STAT test.stat
:MMEMory:LOAD:TRACe
Set
Description Loads trace data from a file to the internal
memory.
Syntax :MMEMory:LOAD:TRACe <trace name>,
<src_file_name>
Parameter <trace name> <NR1> 1~4
<src_file_name> XXX.tra
Example :MMEM:LOAD:TRAC 2,test.tra
:MMEMory:MOVE
Set
Description Moves a designated file from the current file
directory to the destination directory. The file can
be renamed after it is moved.
Syntax :MMEMory:MOVE <src_file_name>,<dest_file_name>
Parameter <src_file_name>
<dest_file_name>
Example :MMEM:MOVE quick1.jpg,quick2.jpg