GW Instek GSP-930 Programming Manual - Manual (Page 94)

GSP-930 Programming Manual
92
Description Returns the power meter power measurement.
Query Syntax :CALCulate:PMETer:POWer?
Return parameter <NR3> Power in the current Y-axis unit.
Example :CALC:PMET:POW?
>-0.83e+01
:CALCulate:PMETer:LIMit:STATe
Set
Query
Description Turns the pass/fail limits on/off in the Power
Meter mode or queries its state.
Syntax :CALCulate:PMETer:LIMit:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:PMETer:LIMit:STATe?
Parameter 0 Turns limits off.
1 Turns limits on.
OFF Turns limits off.
ON Turns limits on.
Return parameter 0 Turns limits off.
1 Turns limits on.
Example :CALC:PMET:LIM:STAT?
>1
:CALCulate:PMETer:LIMit:FAIL?
Query
Description Returns the pass/fail judgment.
Query Syntax :CALCulate:PMETer:LIMit:FAIL?
Return parameter 0 Pass, or limits are not on.
1 Fail
Example :CALC:PMET:LIM:FAIL?
>1
:CALCulate:SEM:STATe
Set
Query