GW Instek GSP-930 Programming Manual - Manual (Page 107)

REMOTE CONTROL
105
Query Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:POSition?
Parameter/
Return parameter LEFT Position the scale to left
CENTer Position the scale to the center
RIGHt Position the scale to right
Example :DISP:TRAC:Y:POS LEFT
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:
RLEVel
Set
Query
Description Sets or queries the Y-axis reference level. The units
depend on the scale type (logarithmic/linear).
Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel <ampl>
Query Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel?
Parameter <ampl> <NRf>
Return parameter <NR3>
Example :DISP:TRAC:Y:RLEV 1 mV
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:
RLEVel:OFFSet
Set
Query
Description Sets or queries the Y-axis reference level offset.
Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet
<rel_ampl>
Query Syntax :DISPlay[:WINDow]:TRACe:Y[:SCALe]:RLEVel:OFFSet?
Parameter <ampl> <NRf> dB
Return parameter <NR3>
Example :DISP:TRAC:Y:RLEV OFFS -5.0e+1 dB
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:
SPACing
Set
Query
Description Sets or queries the type of scale: logarithmic or
linear.