GW Instek GSP-930 Programming Manual - Manual (Page 153)

REMOTE CONTROL
151
Parameter/
Return parameter <freq> <NR3> Hz
<n> <NR1>offset 1~5
Example SEM:OFFS1:FREQ:STAR 2.5e+3
[:SENSe]:SEMask:OFFSet<n>:FREQuency:
STOP
Set
Query
Description Sets or queries the stop frequency of the selected
offset.
Syntax [:SENSe]:SEMask:OFFSet<n>:FREQuency:STOP
<freq>
Query Syntax [:SENSe]:SEMask:OFFSet<n>:FREQuency:STOP?
Parameter/
Return parameter <freq> <NR3> Hz
<n> <NR1>offset 1~5
Example SEM:OFFS1:FREQ:STOP 2.5e+3
[:SENSe]:SEMask:OFFSet<n>:STARt:
ABSolute
Set
Query
Description Sets or queries the amplitude of the start frequency
of the Absolute Mask for the selected offset.
Syntax [:SENSe]:SEMask:OFFSet<n>:STARt:ABSolute <ampl>
Query Syntax [:SENSe]:SEMask:OFFSet<n>:STARt:ABSolute?
Parameter/
Return parameter <ampl> <NR3> dBm
<n> <NR1>offset 1~5
Example SEM:OFFS1:STAR:ABS 1.5e+1
[:SENSe]:SEMask:OFFSet<n>:STARt:
RELative
Set
Query
Description Sets or queries the amplitude of the start frequency
of the Relative Mask for the selected offset.
Syntax [:SENSe]:SEMask:OFFSet<n>:STARt:RELative <ampl>