GW Instek GSP-930 Programming Manual - Manual (Page 92)

GSP-930 Programming Manual
90
Example :CALC:NDB:STAT ON
:CALCulate:NDB:BANDwidth|BWIDth?
Query
Description Returns the NdB bandwidth measurement.
Query Syntax :CALCulate:NDB:BANDwidth|BWIDth?
Return parameter <NR3> NdB bandwidth in Hz.
Example :CALC:NDB:BAND?
>5.5e+04
:CALCulate:NORMalize:STATe
Set
Query
Description Turns the tracking generator normalization on/off
or queries its state.
Syntax :CALCulate:NORMalize:STATe{ON|OFF|1|0}
Query Syntax :CALCulate:NORMalize:STATe?
Parameter 0 Turn normalization off.
1 Turn normalization on.
OFF Turn normalization off.
ON Turn normalization on.
Return parameter 0 normalization is off.
1 normalization is on.
Example :CALC:NORM:STAT ON
:CALCulate:OCBW:STATe
Set
Query
Description Turns the OCBW measurement on/off or queries
its state.
Syntax :CALCulate:OCBW:STATe {ON|OFF|1|0}
Query Syntax :CALCulate:OCBW:STATe?
Parameter 0 Turn OCBW off.
1 Turn OCBW on.
OFF Turn OCBW off.