GW Instek GSP-930 Programming Manual - Manual (Page 110)

GSP-930 Programming Manual
108
INPut Commands
:INPut:ATTenuation ........................................................... 108
:INPut:ATTenuation:AUTO ............................................. 108
:INPut:IMPedance ............................................................... 109
:INPut:OFFSet ..................................................................... 109
:INPut:ATTenuation
Set
Query
Description Sets or queries the input attenuation.
Syntax :INPut:ATTenuation <integer>
Query Syntax :INPut:ATTenuation?
Parameter/
Return parameter <integer> <NR1> 0 to 50
Example :INP:ATT 10 dB
:INPut:ATTenuation:AUTO
Set
Query
Description Sets or queries whether the automatic input
attenuation is on/off.
Syntax :INPut:ATTenuation:AUTO {OFF|ON|0|1}
Query Syntax :INPut:ATTenuation:AUTO?
Parameter 0 Turn automatic input attenuation off.
1 Turn automatic input attenuation on.
OFF Turn automatic input attenuation off.
ON Turn automatic input attenuation on.
Return parameter 0 Automatic input attenuation is off.
1 Automatic input attenuation is on.
Example :INP:ATT:AUTO ON